Raymarine hsb2 PLUS Series - Manual (Page 39)

Chapter 2: Getting Started & Adjusting the Display 2-7
C
on
tr
oll
in
g t
he
Displa
y
2.3 Controlling the Display
You control the display using the cursor and control keys. You start all
operations from the default screen, that is the default soft keys are displayed:
Chart
Radar
When you have completed an action using the soft keys, press ENTER or
CLEAR to return to the default screen; you may need to press ENTER or
CLEAR several times to back-track through the soft key hierarchy.
Note: If you have set up your system so that the default soft keys are not dis-
played all the time, press any soft key to display the labels.
The remainder of this section describes how to select the mode of operation
and switch half-screen windows on/off. The following sections describe how
to set up the display for the Radar and for the Chart.
The controls are summarized in the fold-out illustration on pages 2-11
and 2-12 .
Selecting the Mode of Operation
You use the DISPLAY key to select the full-screen mode.
If the data is available on your system, the following modes (described on
Operating Modes on page 1-6) can be selected:
• Radar
• Chart
• Data log
The DISPLAY key also accesses the soft keys for the half-screen window
options.
Note: If your hsb 2 display system includes a Fishfinder display, refer to the
Owner’s Handbook supplied with your Fishfinder for operating details.
GOTO SCREEN ROUTE FIND SHIP
D4160-1
TARGETS SCREEN HDG MODE
D4152-3
MARPA
81186_3.book Page 7 Thursday, August 22, 2002 8:23 AM