Raymarine hsb2 PLUS Series - Manual (Page 97)

Chapter 4: Integrated Radar Operations 4-5
Man
Ov
er
bo
ard
(M
O
B
)
Moving or Deleting a Mark
You can move or delete marks using the context-sensitive cursor.
➤ Use the context sensitive cursor to move or delete a mark (the label MRK
appears under the cursor). See Moving and deleting items with the context-
sensitive cursor on page 1-17.
4.4 Man Overboard (MOB)
If you lose a person or object overboard, and need to return to the location, you
should use the Man Overboard (MOB) function immediately.
Note: To obtain an MOB position, you need either of the following:
• Position data from a GPS or equivalent device
• Heading and speed data, so that the position can be calculated by dead
reckoning
You can select the type of data used for the MOB position using the Set Up
Menus (see Section 7.3).
➤ To initiate the MOB procedure, press and hold the MARKS key for two
seconds.
The Pathfinder Plus Radar then performs all the following tasks
automatically:
• Marks the current position with a MOB symbol.
• The MOB waypoint replaces any current active waypoint and route.
• Displays the MOB data box, showing the bearing and distance from your
vessel to the MOB waypoint position, and the elapsed time since the MOB
was initiated.
• Displays the position data box, showing your vessel’s position.
• As your vessel moves away from the MOB position, a dotted line is dis-
played connecting the MOB position and the vessel’s current position.
• Sounds a 4-second alarm pattern every 30 seconds.
• Sends an MOB message to other units in the system, via the SeaTalk con-
nection.
MRK
MARKS
81186_3.book Page 5 Thursday, August 22, 2002 8:23 AM