Raymarine hsb2 PLUS Series - Manual (Page 29)

Chapter 1: Overview 1-17
Tr
ack
pad
an
d Cu
rso
r
Tr
ack
pad
an
d Cu
rso
r The cursor is used to:
• Select a position on the screen.
• Select an item, e.g.guard zone on the radar, chart object on the chartplotter.
• Select an area of the radar image to zoom into or pan the chart display..
Moving the Cursor
You can press on any of the four sections of the trackpad to move the cursor in
that direction (up, down, left or right), or press two sections at the same time to
move diagonally. The cursor moves faster as you continue to press the
trackpad. The current cursor position is shown in the cursor data box (if
selected).
The cursor is normally displayed as a crosshair. However, if you have not
moved the cursor for more than five seconds, when you next move it the cursor
is outlined by a circle so it is easier to locate on the screen.
Note: During many operations you cannot move the cursor around the
screen; if you cannot move the cursor using the trackpad, check the default soft
keys are displayed (unless they have been switched OFF in system set up). If
not, press ENTER until they are displayed.
Context-Sensitive Cursor Control
The cursor is context-sensitive. When the cursor is positioned over special
features on the display a text label appears to identify the feature as detailed in
Table 1-3 .
Moving and deleting items with the context-sensitive cursor
Some items on the radar/chartplotter screen have information associated with
them. Most information is displayed in a data box. The context-sensitive
cursor allows you to move databoxes. It also allows you to move or delete
other items, such as radar guard zones. Further details of items that can be
moved or deleted are given in the appropriate sections throughout this
handbook.
➤ To move any data box or selectable item:
1. Use the trackpad to position the cursor over the item until the item’s label is
displayed.
2. Press ENTER to take control of the item, use the trackpad to move it to the
required position.
3. Press ENTER again to fix the position, or press CLEAR to abandon the
move.
➤ To delete an item:
1. Use the trackpad to position the cursor over the item until the item’s label is
displayed then press CLEAR.
81186_3.book Page 17 Thursday, August 22, 2002 8:23 AM