Raymarine hsb2 PLUS Series - Manual (Page 190)

8-16 hsb 2 PLUS Series LCD Display
Ra
da
r System
Chec
ks
an
d Ad
ju
stm
en
ts
1. Press the MENU key to display the setup soft keys.
2. Press the SYSTEM SET UP soft key.
The SYSTEM SET UP menu is displayed, listing the parameters and their cur-
rent settings. The complete list, which you can scroll down, is shown in the
following illustration.
Figure 8-8: System Set Up Menu
3. Use the trackpad to move the selection bar down to the LANGUAGE option.
The soft key labels are updated.
4. Use the soft keys to highlight the required language.
5. Press ENTER to return to the setup soft keys.
6. Press CLEAR to return to the normal radar screen.
Radar System Checks and Adjustments
When the display is connected to a scanner unit you should perform the checks
and adjustments detailed below.
D3640-3
SYSTEM
SET UP¬
RADAR
SET UP¬
MARPA
SET UP¬
D3650-6
SYSTEM SET UP MENU
DATA BOXES
BEARING MODE
CURSOR REFERENCE
CURSOR READOUT
DAY/NIGHT
HELP
SOFT KEYS
KEY BEEP
MOB DATA
MENU TIMEOUT PERIOD
DISTANCE UNITS
SPEED UNITS
DEPTH UNITS
TEMPERATURE UNITS
VARIATION SOURCE
BRIDGE NMEA HEADING
NMEA-OUT SET UP
CURSOR ECHO
DATE FORMAT
TIME FORMAT
TIME OFFSET
GPS SOG COG FILTER
COMPASS SET UP
LANGUAGE
SIMULATOR
TRUE
RELATIVE
RNG/BRG
RNG/BRG
ON
ON
ON
DR
NO TIMEOUT
NAUTICAL MILES
KNOTS
METRES
CENTIGRADE
AUTOMATIC
ON
DD/MM/YY
24 HOUR
UTC
MEDIUM
ENGLISH (US)
OFF
81186_3.book Page 16 Thursday, August 22, 2002 8:23 AM