Revox M10 - Manual (Page 27)

M10 Re:system
26
Calling Remote
Select the Remote softkey in the
Main menu.
As shown in the following graphic,
the Remote menu is divided into
the areas:
- Zone
- Button
- Source
We also recommend that the
settings are made in this order,
i.e. starting with the Zone. Then
you select the key variable
(Remote button) from an
operating unit. Once this is set,
this is assigned to a specific
source.
Select zone
To start with, you select the
(Multiroom) zone with the Zone
softkeys.
We recommend starting with
Zone 1 as then all further zones
take the Zone 1 settings as
default values.
The same Remote buttons are
available in each zone.
You can toggle backwards and
forwards through a loop of the
four Multiroom zones with Zone+
and Zone-.