Revox M10 - Manual (Page 31)

M10 Re:system
30
Scene function
The Scene function has been
integrated with the introduction of
version 2.00 of the software. This
enables music to be started in
different zones and rooms at the
press of a button. The choice of
which source and which volumes
should be selected for the
individual rooms is defined once
when you save a scene.
An audio scene can be called
either through a primary building
management system or through
the M230 / M-Scope service
program.
Within the Revox world, a scene
only covers the audio side.
Linking the Revox scene with, for
example a light or window-blind
scene, is done through the building
control software.
Select the Scene softkey in the
Setup main menu.
A total of 16 scenes are available.
There are four functions for
managing scenes:
a. Saving a scene
b. Calling a scene
c. Deleting a scene
d. Renaming a scene
Scene example
Scene Morning
-----------------------------------------------
Zone 1
Source: Tuner Station 4
Room Status Volume
Kitchen On 10
Diner On 8
Lounge Off -
-----------------------------------------------
Zone 2
Source: CD Title 1
Room Status Volume
Bathroom On 12
Dressing On 5
-----------------------------------------------
Zone 3
Source: Tuner Station 2
Room Status Volume
Nursery Undefined
Hallway Off -
-----------------------------------------------
Zone 4
Source: Tuner Station 4
Room Status Volume
Cinema Off -
Sauna Off -
L
Status: Undefined
The room retains its current
status.