Revox M10 - Manual (Page 30)

M10 Re:system
29
Disable variable
This function allows you to
Disable the remote button. This
makes the audio source no longer
addressable through the
operating unit or remote control.
To do this, select the required
Remote button through the Zone/
Button combination and press the
Disable softkey. The Store softkey
then appears that you need to
press to confirm your change. If
you don’t press Store, the original
setting is retained.
The display shown above
indicates that the button variable
DVD is disabled in Zone 1. The
DVD Remote button can however
be assigned to one or more audio
sources in Zones 2, 3 and 4.