Raymarine C90w - Manual (Page 46)

5. Ensure that the unit fits into the removed area and then file
around the cut edge until smooth.
6. Drill four 4.5 mm (3/16 in) holes as indicated on the template
to accept the securing bolts.
7. Place the gasket onto the display unit and press firmly onto the
flange.
8. Connect the power, data and other cables to the unit.
9. Slide the unit into place and secure using bolts provided.
Once you have secured the display in place, proceed and attach
the front bezel.
Fixing bolts
When flush mounting your display it is important to use bolts of
an appropriate length. The length used is dependant upon the
thickness of the mounting surface.
Thickness (mm) Bolt length (mm)
<3 12
3–7 16
7–11 20
11–15 24
15–19 28
19–23 32
4.3 Bracket (trunnion) mounting
The C-Series widescreen display can be mounted on an optional
bracket.
REQUIRES THE OPTIONAL MOUNTING BRACKET ACCESSORY.
Before mounting the unit ensure that you have:
• Selected a suitable location
• Identified the cable connections and route that the cables will take
• Attached the front bezel
46 C-Series Widescreen installation