Raymarine C90w - Manual (Page 48)

4.4 Front bezel
Attaching the front bezel
Before fitting the bezel you must have mounted the unit in its
required location.
1. Carefully lift one edge of the screen protection film, so that it is
accessible for removing when unit installation is complete.
2. Place the bezel over the front of the C-Series Display, ensuring
that locking lugs located at the bottom edge of the bezel are
latched into position.
D11196-1
Clip recess
3. Ensure that the control buttons pass through their respective
openings.
4. Apply firm but even pressure to the bezel along the:
i. Outer edges - work from the sides upwards and then along
the top edge, to ensure that it clips securely into position.
ii. Inner edges - particularly along the chart card door edge, to
ensure that the bezel sits flat.
48 C-Series Widescreen installation