Raymarine C90w - Manual (Page 47)

D11191-1
Note: Bracket (trunnion) mounting kit is available as an optional
accessory.
1. Mark the location of the mounting bracket screw holes on the
chosen mounting surface.
2. Drill pilot holes for the screws using a suitable drill, taking care
that there are no cables or anything that may be damaged
behind the surface.
3. Use the screws supplied to attach the mounting bracket securely.
4. Fit the trim ring to the rear of the display using the M4 bolts
supplied.
5. Attach the display unit to the mounting bracket.
Once you have secured the display in place, proceed and make
the required cable connections.
Location and mounting 47