Radio Shack 43-3823 - Manual (Page 12)

Operation
12
1. Press and hold the FLASH until you hear a
confirmation tone.
2. To set the dial mode for pulse dialing, press #.
Or to set the dial mode for tone dialing, press
∗
/tone .
You hear a confirmation tone to indicate the
setting is complete.
OPERATION
M
AKING AND
R
ECEIVING
C
ALLS
Even when you turn off the base’s ringer, you can
still make or receive calls using this phone.
Telephones on the same line and the handset (if its
ringer is not turned off) still ring when there is an
incoming call.
Action Handset On Base Handset Off Base
To
receive
a call
Pick up the handset
(Auto Talk).
Press talk/FLASH,
any number,
∗
/tone
or #.
To
make a
call
1)Pick up the handset.
2)Press talk.
The TALK/BATT
LOW LED flashes
and turns on.
3)Listen for the dial
tone.
4)Dial the number.
1)Press talk.
The TALK/BATT
LOW LED flashes
and turns on.
2)Listen for the dial
tone.
3)Dial the number.
To hang
up Press end or return the handset to the base
(Auto Standby).
To
redial
1)Pick up the handset.
2)Press talk.
3)Listen for the dial
tone.
4)Press REDIAL/
PAUSE.
1)Press talk.
2)Listen for the dial
tone.
3)Press REDIAL/
PAUSE.
43-3823.FM Page 12 Thursday, March 27, 2003 10:22 AM