Radio Shack 43-3823 - Manual (Page 26)

The Integrated Answering Device
26
Setting the base ringer volume
You have three ringer options. One allows you to
turn the ringer off. The other two are volume
levels.Ô
1. Press ringer .
You hear the ringer at the current volume level
([
] High, [ ] Low, [ ] off) (if you set the base
ringer volume to off, “Ringer off” is announced)
and it is displayed on the base.
2. Press ringer until the desired ringer option
appears.
3. The system displayed new ringer volume.
Temporarily Mute the Base Ringer
Press
to temporarily mute the incoming ring.
The ringer will sound with the next incoming call.
Adjusting the speaker volume level
You can adjust the volume of the base speaker by
pressing
SELECT/VOLUME/ or SELECT/VOLUME/
on the base. Press SELECT/VOLUME/ for
louder or SELECT/VOLUME/ for softer during the
base speaker is being used except for menu mode.
Ô
The numbers - are displayed on the base
indicating the volume levels. being the softest
and being the loudest.
Ô
NOTE
Ô
Setting the base ringer
volume
When you have set the
base ringer to off and the
handset is on the base, you
will still hear the ringer from
the handset.
Adjusting the speaker
volume level
When you press
SELECT/
VOLUME/ at 9 or SELECT/
VOLUME/ at 0, an error
tone sounds.
43-3823.FM Page 26 Thursday, March 27, 2003 10:22 AM