Radio Shack 43-3823 - Manual (Page 31)

The Integrated Answering Device
31
*For Memo Record and Greeting Message Record
function, the first time you enter the corresponding
command, it starts the Recording function. If you
want to stop the recording, enter the command
again.
5. After all of the Help Guidance prompts have
played, you hear intermittent beeps indicating
that the system is in the command waiting
mode. You may enter another command at this
time from the chart.
6. When you are finished, hang up to exit the
system. The answering system automatically
returns to standby.
Turn on the answering system remotely
If you have forgotten to turn on your answering
system, you can turn it on remotely from any touch-
tone telephone.
1. Call your telephone number.
2. Wait ten rings until the system answers. You
hear a beep.
3. Press 0 and then enter your PIN code. The
answering system announces the current time
and the number of messages stored in
memory. You hear “To play incoming
messages, press
02 . For help, press 10 ”.
4. Press 0 then 6 to turn the answering system
On. You hear the outgoing message and a
confirmation tone.
5. Hang up the phone and subsequent calls will
be answered by the system.
43-3823.FM Page 31 Thursday, March 27, 2003 10:22 AM