Radio Shack 43-3823 - Manual (Page 14)

Operation
14
T RAVELING O UT - OF -R ANGE
During a call, as you begin to move your handset
too far from your base unit, your call will terminate
within 1 minutes.
S ELECTING A D IFFERENT C HANNEL
If you encounter interference while using your
phone, you can manually change the phone’s
channel for clear operation. This function works
only when the phone is in use.
Press CHANNEL . The TALK/BATT LOW LED flashes,
indicating the phone is changing to another
channel.
P
AGE
To locate the handset (while it’s off the base), press
find hs on the base. The handset beeps for 60
seconds.Ô
Paging is canceled when pressing any handset key,
find hs on the base or the handset is returned to the
base.
F LASH AND C ALL W AITING
If you have “Call Waiting” service and a call waiting
tone sounds while you are on a call, press
FLASH to
accept the waiting call. There is a short pause, then
you will hear the new caller. To return to the original
caller, press
FLASH again.Ф
Ф
NOTE
Ô
Page
Paging is also canceled
when the phone receives
an incoming call.
Flash and Call Waiting
You must subscribe
through your local
telephone company to
receive Call Waiting
Service.
43-3823.FM Page 14 Thursday, March 27, 2003 10:22 AM