RCA B27TF680 - Manual (Page 13)

Chapter 1 11
Connections & Setup
Note: The back of your satellite receiver might not look exactly like the one
shown here.
VIDEO
LINE IN
ANT/CABLE
75 LINE
IN 1 OUT
AUDIO
TV/VCR/DVD Back Panel
CH3
CH4
S-VIDEO
L R VIDEO
OUT
IN FROM ANT
OUT TO TV SATELLITE
IN
From
Satellite
Satellite Receiver
Back Panel
From Antenna/Cable Feed
1A
1B
3
2
TV
/V
CR
/D
VD
Sa
te
llit
e
Re
ce
ive
r
TV/VCR/DVD + Satellite Receiver
1. Connect the satellite receiver to the TV/VCR/DVD.
A. Connect one end of a coaxial cable (not included) to the TV/VCR/DVD’s
ANT/CABLE jack. Connect the other end to the satellite receiver’s Antenna Output jack
(sometimes labeled OUT TO TV).
B. Connect the audio/video cables. Connect audio cables (white and red) to the TV/VCR/DVD’s
LINE IN/IN 1 AUDIO (L and R) jacks and the other ends to the satellite receiver’s
corresponding Audio Output jacks. Connect one end of the video cable to the TV/VCR/DVD’s
LINE IN/IN 1 VIDEO jack, and the other end to the satellite receiver’s Video Output jack.
2. Connect antenna or cable to your satellite receiver.
Connect the coaxial cable from your antenna, cable feed, or cable box to the Antenna Input jack
on the satellite receiver (sometimes labeled IN FROM ANT).
3. If necessary, connect the satellite’s antenna cable to the satellite receiver.
If the coaxial cable from the satellite dish antenna isn’t already connected to the satellite
receiver’s Input jack (sometimes labeled SATELLITE IN), connect it now.
Go to page 14