Recording one channel while watching another, Dvd basics, Set the menu language – RCA B27TF680 User Manual
Page 20: Connections & setup, 18 chapter 1, Vcr button tv button ch +/– buttons, Press stop when you want to stop recording
18
Chapter 1
Connections & Setup
1
2
3
4
5
6
7
8
9
0
ON•OFF
TV
VCR
INFO
CLEAR
INPUT
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUSE
OK
CH
+
CH
VOL
VOL
D
V
D OPTIO
N
S
TIMER
S
PE
ED-ZOO
M
VCR2
DVD
SAT•CABLE
RETURN
SOUND
MUTE
TV MENU
VIEW
REPEAT
DVD SETUP
SKIP-
TITLE
SLOW
INDEX-
INDEX+
DISC
MENU
TRACK
-
TRACK
+
VCR
button
TV button
CH +/–
buttons
Recording One Channel While Watching Another
1.
Insert a videotape, with its safety tab in place, into the VCR.
Note: You can’t record on a tape with the safety tab removed. If the safety tab is
removed and you want to record on the tape, simply cover the hole with adhesive
tape.
2.
Make sure the remote is in VCR mode by pressing the VCR button.
3.
Use the CH +/– buttons to select the channel you want to record and press
the RECORD button to begin recording. The RECORD indicator on the front
panel lights.
4.
Press TV (the VCR indicator turns off) and then press VIEW to switch to the
TV. Use the CH +/– buttons to tune to the channel you want to watch.
Note: If you want to review what the VCR is recording, press VIEW (the VCR
indicator lights) and the TV/VCR/DVD tunes to what the VCR is recording.
5.
Press STOP when you want to stop recording.
Note: If you want to pause the recording for a short time (such as during a
commercial), press PAUSE instead of STOP.