RCA B27TF680 - Manual (Page 47)

Using the TV/VCR/DVD’s Features
Chapter 3 45
Zoom
You can zoom in on the picture.
1. Press SPEED-ZOOM to zoom in on the picture. The ZOOM indicator appears on the TV
screen.
2. Press SPEED-ZOOM again to increase the zoom. You can use the arrow buttons to move
the zoomed area up, down, left, or right.
Notes: The zoom indicator turns red when you cannot perform the selected zoom operation.
When playing a pan and scan disc, only two zoom levels are available.
The zoom image may become distorted.
3. Press SPEED-ZOOM repeatedly or press STOP to return to a normal picture.
Using the Repeat Feature
Press the REPEAT button to use the repeat feature. There are three types of repeat available on
DVDs.
• Chapter – repeats the chapter that is playing
• Title – repeats the title that is playing
• A•B – Set the beginning (point A) and the end (point B) to make this part of the disc play
repeatedly.
To Use Repeat:
1. While a disc is playing, press REPEAT on the remote. The (repeat icon) appears
on-screen.
• Press the REPEAT button once and press the PLAY button to repeat the chapter that is
playing.
• Press the REPEAT button twice and press the PLAY button to repeat the title that is
playing.
• Press the REPEAT button three times and press the PLAY button when you reach the start
of the section you want to repeat. Press the PLAY button again when you reach the end
of the section you want to repeat. The section is repeated.
2. To cancel repeat, press the STOP button or press the REPEAT button until the turns off.
Notes: A•B repeat only operates on the same title or chapter of some discs.
A•B does not operate on scenes where different camera angles are recorded.