RCA B27TF680 - Manual (Page 14)

12 Chapter 1
Connections & Setup
Note: The back of your Dolby Digital* or DTS** receiver might not look exactly
like the one shown here.
VIDEO
LINE IN
ANT/CABLE
75 LINE
IN 1 OUT
AUDIO
TV/VCR/DVD Back Panel
DIGITAL IN
From Antenna/Cable Feed
DOLBY DIGITAL
or DTS RECEIVER
TAPE VCR IN OUT IN OUT
CD
IN
TV
IN
R
L
A/V RECEIVER
-OR-
1B
1A
TV
/V
CR
/D
VD
Re
ce
ive
r
*Dolby Digital is a trademark of Dolby Laboratories Licensing Corporation
**DTS is a registered trademark of Digital Home Theater Systems, Inc.
Dolby Digital ® and DTS ®
Both Dolby Digital and DTS are audio formats used to record 5.1-channel audio signals onto the
digital track of film (while the film is being made). Both of these formats provide up to six separate
channels: left, right, center, left rear, right rear, and common subwoofer.
The disc will play 5.1-channel sound only if you’ve connected a DTS or Dolby Digital receiver or
decoder and if the original movie the disc was recorded from was encoded in the Dolby Digital or
DTS format.
Please Read this Before Using the OPTICAL DIGITAL OUT Jack!
This TV/VCR/DVD’s digital output jack is designed for a connection to a Dolby Digital or DTS
receiver or decoder. There are two types of Digital Out jacks on this unit: optical and coaxial. Use
the jack (and the corresponding cable) that matches the type of Digital Audio In jack your
receiver or decoder has.
Older digital equipment may not be compatible with the Dolby Digital bitstream. Such a
connection can create a high level of noise that may be harmful to your ears, and could damage
headphones or speakers.
It is important to choose the correct digital output setting in the TV/VCR/DVD’s audio menu,
especially when you use the OPTICAL DIGITAL OUT jack (Chapter 5 has details).