Raymarine Satellite TV Systems - Manual (Page 30)

26 Raymarine Satellite TV Systems
Changing the default satellite
Your ACU is programmed with two default satellites. To change the default
satellite, press the left hand soft key. The default satellite changes and is
automatically tracked by the antenna.
Monitoring the current status of the antenna
1. Antenna is searching for satellite A.
2. Antenna is tracking satellite A.
3. Antenna is unwrapping the cable.
TRACKING A: ASTRA2
B: HOTBIRD SETUP
D7968_1
TRACKING B: HOTBIRD
A: ASTRA 2 SETUP
D7966_1
SEARCHING A: ASTRA2
B: HOTBIRD SETUP
D7967_1
TRACKING A: ASTRA2
B: HOTBIRD SETUP
D7969_1
ANTENNA IS UNWRAPPING
B: HOTBIRD SETUP
4. Antenna is again tracking satellite
A. Press to display position detail.
5. Antenna position detail and signal
strength is displayed.
Press center soft key to display NMEA
GPS page.
6. The NMEA GPS information is
displayed.
Press center soft key to return to
antenna status display.(Standard
models)
Press center soft key to display skew
angle page.(Premium models only).
7. The skew angle is displayed.
Press center soft key to return to
antenna status display ( Premium
models only).
D7970_1
TRACKING A: ASTRA2
B: HOTBIRD SETUP
D7971_1
AZ:###.# EL:###.#
SIGNAL:### SETUP
126.75E 37.20N *
D9612_1
SKEW : 28.3 400
-1 +1
> --
D9609
_1
81258_3.book Page 26 Wednesday, November 8, 2006 2:06 PM