Raymarine Satellite TV Systems - Manual (Page 32)

28 Raymarine Satellite TV Systems
Setting the satellite pair - DirecTV
Note: DiSEqC is not used with Dish Network or ExpressVu satellites.This
menu is displayed when the DiSEqC method - see page 34 is set to
“Use to change sat”.
1. Follow steps 1 thru 3 for entering set
up mode- see “Set up mode” on
page 27. Press YES to set satellite
pair.
2. Set satellite A.
Press NEXT to show alternative
satellite name.
Press SELECT to set chosen satellite to
SAT A.
Press EXIT to return to main set up
menu.
3. Set satellite B.
Press NEXT to show alternative
satellite name.
Press SELECT to set chosen satellite to
SAT A.
Press EXIT to return to main set up
menu.
D7974_1
SET SAT PAIR?
PREV YES NEXT
D78642_1
SAT A : DTV101
NEXT SELECT EXIT
D8643_1
SAT B: DTV101
NEXT SELECT EXIT
4. Set satellite A when DiSEqC is active
from IRD.
Press NEXT to show alternative
satellite name.
Press SELECT to set chosen satellite to
SAT A.
Press EXIT to return to main set up
menu.
5. Set satellite B when DiSEqC is active
from IRD.
Press NEXT to show alternative
satellite name.
Press SELECT to set chosen satellite to
SAT A.
Press EXIT to return to main set up
menu.
6. Press YES to save selections.
Press NO to cancel and return to main
setup menu.
D8644_1
SAT A* : DTV119
NEXT SELECT EXIT
D8645_1
SAT B* : DTV110
NEXT SELECT EXIT
D7977_1
SAVE?
YES NO
81258_3.book Page 28 Wednesday, November 8, 2006 2:06 PM