Raymarine Satellite TV Systems - Manual (Page 51)

47
Antenna diagnosis
1. Press YES to enter set up mode.
2. Press NEXT 8 times to go to Antenna
Diagnosis menu.
3. Press YES to enter diagnosis mode.
4. Code 101 is being tested.
Press EXIT to return to main set up
menu.
D7973_1
SETUP MODE?
YES NO
D7974_1
SET SAT PAIR?
PREV YES NEXT
DD8647_1
ANT DIAGNOSIS?
PREV YES NEXT
D8648
1
CODE101 TESTING
EXIT
5. Code 101 has been tested and passed.
Press Exit to return to main set up
menu.
Code Test
Code 101 Communication between antenna and ACU is being tested.
If failed, check the power and data cable connections.
Code 102 AZ CW (clockwise)) limit switch is tested.
If failed check the limit switch, motor and belt for azimuth axis.
Code 103 AZ CCW (counter clockwise) limit switch is tested.
If failed check the limit switch, motor and belt for azimuth axis.
Code 104 EL axis is tested.
If failed check the limit switch, motor and belt for elevation axis.
Code 105 Sub-reflector is tested.
If failed, check sub-reflector.
Code 106 LNB tested.
If failed, check the LNB and control board.
D8649
1
CODE101 PASSED
EXIT
81258_3.book Page 47 Wednesday, November 8, 2006 2:06 PM