Raymarine Satellite TV Systems - Manual (Page 41)

37
Setting antenna move step
3. Press YES to enter Go position.
4. Input position value for azimuth
(AZ) axis.
+ increases a value. - decreases a
value.
Change the underscored digit using
the +/- buttons.
Press INPUT to accept a value.
5. Input position value for elevation
(EL) axis.
+ increases a value. - decreases a
value.
Change the underscored digit using
the +/- buttons.
Press INPUT to accept a value.
D8002_1
ANTENNA GO POSITION?
PREV YES NEXT
D8006_1
AZ : ###.##DEG
+ INPUT -
D8007_1
EL : ###.##DEG
+ INPUT -
6. Press YES to send position command
and display current position during
motion.
Press NO to return to antenna go
position menu.
7. Press EXIT to return to main set up
menu.
1. Press YES to enter set up mode.
2. Press NEXT 7 times to go to the Ant
move step menu.
D8008_1
GO TO POSITION?
YES NO
D8009_1
AZ:###.## EL:###.#
EXIT
D7973_1
SETUP MODE?
YES NO
D8646_1
SET SAT PAIR?
PREV YES NEXT
81258_3.book Page 37 Wednesday, November 8, 2006 2:06 PM