Raymarine Satellite TV Systems - Manual (Page 39)

35
Setting the LNB skew angle
Note: This menu is only applicable to Raymarine 60STV Premium models
Note: * CALIBRATION - uses the skew sensor motor to position the LNB.
MANUAL- enables you to set the skew angle manually according
to signal strength.
1. Press YES to enter set up mode.
2. Press NEXT 5 times to enter the
Local frequency menu.
3. Press YES to view LNB skew.
D7973_1
SETUP MODE?
YES NO
D8646_1
SET SAT PAIR?
PREV YES NEXT
Dxxxx_1
SET LNB SKEW ?
PREV YES NEXT
4. Select skew angle adjustment
method*.
PREV - view previous setting
NEXT - view next setting
SELECT - select the current setting
5. Press + to move LNB clockwise
Press - to move LNB counter clockwise
Press SET to accept new LNB skew
position.
Dxxxx_1
SKEW : CALIBRATION
PREV SELECT NEXT
Dxxxx_1
SKEW : ##.# -> ###
- SET -
81258_3.book Page 35 Wednesday, November 8, 2006 2:06 PM