Rugged Outback RS416 - Manual (Page 15)

15

2008 RuggedCom Inc. All rights reserved Rev104
4.2.1 AC Power Supply Wiring Examples
Figure 8: AC Power supply wiring examples
NOTES:
1. 100-240VAC rated equipment: A 250VAC appropriately rated circuit breaker must be
installed within 3m of unit.
2. Equipment must be installed according to the applicable country wiring codes.
3. When equipped with two HI voltage power supplies, independent AC sources can be used
to power the product for greater redundancy. However, separate circuit breakers must be
installed and separately identified (not shown in above figure).