Rugged Outback RS416 - Manual (Page 9)

9

2008 RuggedCom Inc. All rights reserved Rev104
The port-based LEDs can be cycled between three display modes: Status, Duplex, and Speed.
Pushing the mode button causes the display mode to be cycled. Table 2 and Table 3 define the
possible port LED colours and the corresponding description.
Mode Colour
Ethernet Port Status
LEDs
Serial Port Status
LEDs
Green (Solid) Link -
Green (Blinking) Activity Traffic Status
Off No link No Traffic
Green (Solid) Full-Duplex Full-Duplex
Orange (Solid) Half-Duplex Half-Duplex Duplex
Off No link No link
Green Blinking - > 57600 bps
Green (Solid) 10 0Mbps 19200 bps – 57600 bps
Orange (Solid) 10 Mbps < 19200 bps
Speed
Off No link No link
Table 2: LED Display - Port LED behavior definition