Roland HP-201 - Manual (Page 21)

21
Performance
Adding Reverberation to the Sound (Reverb)
By applying the reverb effect you can produce a pleasant reverberation, making it
sound as though you were performing in a concert hall.
fig.panel2-5
1.
Press the [REVERB/KEY TOUCH] button.
The button’s indicator will light, and a reverb effect will be applied to the sound.
To cancel the reverb effect, press the [REVERB/KEY TOUCH] button, getting its
indicator to go dark.
■ Changing the Depth of the Reverb Effect
The amount (depth) of the reverb effect can be set to any of ten levels.
1.
Hold down the [REVERB/KEY TOUCH] button and press the “C ” or
“E ” key.
Pressing the “C ” key as you hold down the [REVERB/KEY TOUCH] button reduces
the amount of reverb effect applied. Holding down the [REVERB/KEY TOUCH] button
and pressing the “E ” key increases the reverb effect.
2.
To restore the reverb depth to its factory-set state, hold down the
[REVERB/KEY TOUCH] button and press the “C ” and “E ” keys
simultaneously.
You can use the Memory
Backup function to store this
setting in internal memory (p.
36).
You can change the Depth of
the Reverb Effect by pressing
any “C ” or “E ” key.
Press While holding down
the [Reverb/Key Touch]
button...
This is set to “4” when the
HP201 is shipped from the
factory.
HP201_e.book 21 ページ ２００７年２月２８日 水曜日 午前９時１０分