Roland HP-201 - Manual (Page 34)

34
Changing Various Settings
Changing the Damper Pedal’s
Resonance (Damper Resonance)
On an acoustic piano, depressing the damper pedal makes
the notes you play resonate with other strings, adding rich
reverberations and fatness to the sound. The damper pedal on
the HP201 recreates this resonance (damper resonance) when
depressed.
You can select from eight levels of depth for the resonant
sound (resonance level).
You can use the Memory Backup function to store this
setting in internal memory (p. 36).
This is set to “4” when the HP201 is shipped from the
factory.
NOTE
This setting is enabled only with the piano tones. You
cannot set this for other tones.
1. While holding down the [REVERB/KEY TOUCH]
buttons and press the appropriate key (C2–C3) on
the keyboard.
Larger values will produce a deeper effect.
Setting the Tuning Curve
(Stretch Tuning)
A piano is generally tuned to a pitch with a lower bass range
and a higher treble range than equal temperament. This
special tuning method for pianos is called “Stretch Tuning.”
NOTE
This effect works only with the piano tones.
Stretch Tuning is set to On when the instrument is turned
on.
1. While holding down the [METRONOME] and
[REVERB/KEY TOUCH] buttons, the “D2” note to turn
the setting On, or press the “C2” note to turn the
setting Off.
Key
Pressed
C2 D2 E2 F2 G2 A2 B2 C3
Depth of
Effect
Off 1 2 3 4 5 6 7
F2 C2 C3 D2 E2 G2 A2 B2
A0
Key
Pressed
Setting Explanation
C2 Off
This is the standard tuning curve.
This is the right choice when using
Dual play (p. 17), or when playing
in ensemble with other instruments.
D2 On
This tuning curve expands the bass
and treble ends somewhat.
It is suitable for performances such
as piano solos.
C2 D2
Press
A0
HP201_e.book 34 ページ ２００７年２月２８日 水曜日 午前９時１０分