Roland HP-201 - Manual (Page 31)

31
Recording Your Performance
Playing Back the Recorded Performance
Playing back the song immediately after you’ve stopped recording
1.
Press the [SONG] button.
The song you recorded will play back.
Playing back the recorded song after you’ve played other internal
songs
1.
Hold down the [SONG] button and press the “A0” key.
The recorded performance will play back.
Erasing Recorded Performances
1.
Hold down the [SONG] button and press the [TONE] button.
The recorded performance is erased.
If you record your performance
with a time signature of 0/4,
the metronome will sound at 4/
4 during playback.
Some of the built-in songs have
a tempo and time signature that
are based on eighth notes or
half notes, such as 3/8 or 2/2.
If you record your own
performance immediately after
playing back one of these
songs, the tempo of the music
that’s recorded will be based
on eighth notes or half notes.
A0
If a recorded song has been
saved, the [TONE] button’s
indicator will blink while you
press the [SONG] button.
HP201_e.book 31 ページ ２００７年２月２８日 水曜日 午前９時１０分