Roland FP-3 - Manual (Page 13)

13
Chapter 1 Playing the Keyboard
When the following appears in the display
If there is any performance data stored in the FP-3’s memory, the following
appears in the display.
fig.01-03
Until you erase the performance data, you cannot play back an internal
song.
To erase the performance data and play back the internal song, press the
[Rec] button.
If you don’t want to erase the song, press the [Play] or [Song] button.
■ Listening to Each Part Separately
With the internal songs, you can select the performance part that is to be
played back.
With Piano songs 1 to 50, you can also practice each hand separately while
playing along with the song.
1.
Select the song to be played back.
2.
Hold down the [Play] button and press the button, either
[Chord (1)] or [ (2)], for the part that is not to be played
back.
The indicator on the selected button goes out.
The performance data is assigned to the Track buttons as shown below.
fig.01-05
3.
Press the [Play] button.
The song will begin playing back.
The sound for the performance part selected in Step 2 is not played.
Temporarily preventing the sounds of a specified part from playing is called
“muting.”
4.
Hold down the [Play] button and press the button selected in
Step 2.
The sound of the muted part is then played.
Flashes in green Flashes in red Flashes in green
Right-hand
Part
Left-hand
Part