Error messages/other messages – Roland FP-3 User Manual
Page 47
47
Error Messages/Other Messages
* Error messages are indicated by an “E.” before the number
When the Error message appears, the [-] and [+] button indicators flashes in red.
Press the [-] or [+] button, and you can cancel the error message.
Display
Meaning
USr
User. Stores recorded Performances. (p. 12, p. 33)
Usr.
The “.” in the display indicates that there is Performance material already
recorded. (p. 12, p. 33)
d.
Demo song number. (p. 12, p. 36)
P.
Piano song number. (p. 12, p. 36)
r.
Rhythm number. (p. 28)
dEL
This appears when you attempt to delete a recorded song (p. 37).
Additionally, this appears after recording a song when you try to select
E.32
The amount of performance information is too large, and further recording is
not possible.
E.40
Too much MIDI data was sent from the external MIDI instrument at one
time, and the unit could not process the data. Reduce the amount of MIDI
data being sent to the FP-3.
E.41
A problem such as a loose MIDI cable or computer cable occurred. Make sure
the MIDI cables and computer cables are correctly hooked up.
E.51
A system error has occurred. Try performing the procedure over again.
Should this message continue to appear even after repeated attempts, please
consult the nearest Roland Service Center.