Roland FP-3 - Manual (Page 34)

34
Chapter 3 Recording a Performance
■ Recording a Performance Using Rhythms
You can also easily record session performances to the internal Rhythms
and chord progressions.
fig.03-02
1.
Select the Tone or Rhythm to be played.
Also set the Rhythm tempo to one that is easier to play (p. 29).
2.
Press the [Rec] button.
The [Rec] button’s indicator lights up, the [Play] button’s indicator flashes,
and the FP-3 is put into recording standby.
3.
Press the [Chord] button or the [Drums] button to begin
recording.
The Rhythm starts to play, while simultaneously recording begins.
4.
Press the [Drums] button to stop recording.
The ending is played, and the performance and recording stop.
When you press the [Rec] button or the [Play] button, recording stops
without the ending being played.
Listening to the Recorded Performance
5.
Press the [Play] button.
Press the [Play] button again to stop playback.
NOTE
When you record
additional material without
erasing the previously
recorded sounds, the song
is recorded at the initially
recorded tempo.
2 1 1 5 4 3
For more information on
the different Rhythm and
Chord progression pattern,
refer to the “Rhythm List”
(p. 49) and “Chord
Progression Pattern List”
(p. 50).
For more on selecting tone
and Rhythm, refer to p. 14
and p. 28.
NOTE
A Rhythm cannot be
started while recording is
in progress.