RCA VR636HF - Manual (Page 10)

8
Setting Up the VCR
USING THE MENU to set up features
You can set up features by using the menu system. Each feature
that appears in the QuickSet Guide is explained in this section
as well as a few others you may want to set up before you
begin using your VCR.
language
Select your preferred language, and the on-screen displays will
appear in that language.
On-Screen Menus
Not all the VCR screens are shown in this
manual when explaining the features.
Using the QuickSet guide
The QuickSet Guide is an automated procedure that helps you
set up your VCR. The first time you turn on your VCR, the first
screen of the Guide appears.
Select a language.
Seleccione un idioma.
Choisissez une langue.
1 English
2 Espanol
3 Francais
˜
˜
Just follow the step-by-step procedures until setup is complete.
Some of the feature options may not apply to your VCR
configuration.
If the menu does not appear:
• Make sure TV is tuned to the same channel as the 3 CH.4
switch or TV’s video line input.
• Make sure VCR indicator is on in the VCR display if you
connected your VCR using the ANT. IN and RF OUT jacks.
• Check your connections.
If you choose to set up the VCR options individually, then go to
the next section.
If you ever need to manually enter setup.
1. Press MENU to display the VCR MAIN MENU.
2. Press 5 to display the Setup menu.