RCA VR636HF - Manual (Page 34)

32
RECORDING
Timer Recording with VCR Plus+
You can use VCR Plus+ to simplify timer programming by entering
the TV show’s PlusCode number found in most TV and cable
listings.
Setting Up the Channel List
If you did not set up the VCR Plus+ channel list, you can do it now.
1. Display the CHANNELS menu from the VCR MAIN MENU.
2. Display the VCR Plus+ Channel List menu.
3. Go to Setting Up Your VCR if you need more information on
setting up your VCR Plus+ channel list.
Using VCR Plus+
1. Press MENU to bring up the VCR MAIN MENU.
2. Press 1 to display the VCR PLUS+ menu.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
6. Review the information to make sure it is correct, and then
press MENU to save.
Program 1 (One time)
Channel 104 Cable
Start Time 12:00 AM
End Time 01:30 AM
Start Date 11/18/98 Wed
Tape Speed SLP
Press CLEAR to correct
Press MENU for next prog
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Press MENU to continue
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
VCR PLUS+
Enter PlusCode Number
(from TV listing)
_
Press MENU to cancel
VCR Plus+ and PlusCode are registered trademarks
of Gemstar Development Corporation.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box Setup
6 DSS Setup
0 Exit
VCR+ Channel My Channel
5 46
4 --
3 -> -> -> 23
2 --
1 --
Use CH+/- to select
Press 0-9 to change
Press MENU to save
If your cable box can not be
controlled by the VCR, turn it on and
tune it to the channel you want to
record before the recording is
to begin.
If, after perform cbsetup, i
If your cable box is not copatible, you
must turn on cable box and tune it to
the channel you want to record in
order for a vcr plus recording.
if, after perform cbsetup, if cable box
ISS compabile, turn on cable box and
leave on for vcrplus recording.