RCA VR636HF - Manual (Page 19)

17
Setting Up the VCR
Time/Date Display
Pressing INFO on the remote displays
the time and date on the screen.
SET THE TIME AND DATE Manually
If the AUTO CLOCK SET was unsuccessful, set the clock through
the menu option. The AUTO CLOCK SET feature is set to OFF
automatically when you set the clock this way.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 3 to display the TIME menu.
TIME
1 Set Time and Date
2 Auto Clock Set: ON
3 Set Time Zone
4 Set Daylight Savings
XDS Time Data was
not found.
0 Exit
3. Press 1 to display the SET TIME AND DATE menu.
SET TIME AND DATE
Time --:--
(hh:mm)
Date --/--/--
Press MENU to cancel
4. Enter the data using the number buttons. Press 0 before
single-digit numbers and follow the on-screen directions.
SET TIME AND DATE
Time 12:34 PM
Date 11/18/98 Wednesday
Press CLEAR to correct
Press MENU to set