Appendix: reference – RCA VR636HF User Manual
Page 66
Advertising
64
appendix: reference
No stereo sound during playback
•
Check to make sure the Tape Playback feature is set to HI-FI to hear stereo sound during playback. The
tape you are playing must be recorded in HI-FI in order to play back in HI-FI.
•
Must use the AUDIO/VIDEO jacks on the back of the VCR to hear stereo sound.
Stereo audio too noisy
•
Stereo signal is weak. Set Reception: STEREO/SAP/MONO feature to MONO.
•
Press one of the TRACKING up or down buttons to minimize the noise.
Advertising