Connections, Using this connection – RCA VR636HF User Manual
Page 56
54
connections
VCR
CABLE
CABLE BOX
3 CH. 4
VIDEO
AUDIO
IN
OUT
ANT. IN
RF OUT
L
R
TV
CABLE/
ANTENNA
INPUT 1
VIDEO
R
L/MONO
S-VIDEO
AUDIO
OUTPUT
R
L
INPUT 2
VIDEO
R
L/MONO
IN
OUT
TV with audio/Video jacks and Cable box
to unscramble pay channels only
This connection assumes:
•
You are using a cable box only to unscramble premium
channels.
•
Your TV has audio/video input jacks.
This connection provides:
•
Stereo sound playback from VCR.
•
Recording a scrambled or unscrambled channel through the
cable box while watching an unscrambled channel.
To use this connection, you must have:
•
(3) coaxial cables
•
(3) audio/video cables
•
(1) splitter
If your cable box is remote controllable:
•
Position it above the VCR as shown. Make sure not to block
any of the VCR’s ventilation holes.
To connect:
1.
Connect cables as shown.
2.
Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to its video input channel. Use of TV•VCR button is
not required.
Auto TV/VCR Setting:
•
Set the Auto TV/VCR feature to OFF.
To play a tape:
1.
Insert a tape.
2.
If necessary, press PLAY.
To record a scrambled or unscrambled program and watch
another unscrambled program:
1.
Begin recording a scrambled or unscrambled program
through the cable box using one of the recording features.
2.
Select an unscrambled channel on the TV.
All scrambled channels must be
viewed through the VCR.
For Cable Box Setup, select ALL
channels. See page 11.
CABLE BOX
VCR'S
SIGNAL
Position Remote-Controllable
Cable Box
VCR
TRANSMITTER