Raritan Computer DOMINION DSX-0N-E - Manual (Page 156)

138 D OMINION SX U SER G UIDE
Do you want to proceed with the reboot? (no/yes) (default: no)
yes
Restore Command
The restore command retrieves a copy of the Dominion SX system from a system and writes the
file to the Dominion SX server.
The syntax of the restore command is:
restore [ip IP] <login LOGIN> <passwd PASSWD> [path PATH] [file FILE]
The restore command options are described in Table 49.
Table 52 Restore Command
C OMMAND O PTION D ESCRIPTION
[ip IP] IP address of the target system from which the restore data will be
retrieved.
<login LOGIN> Username of the account on the system where the restore data is
stored.
<passwd PASSWD> Password for the above account.
[path PATH] Specifies the path to the backup file to be restored to a similar system
with the same port density.
[file FILE] Specifies the name of the file in which the backup data was saved.
Restore Command Example
In the example below, the console server data is being retrieved from a system at IP address
192.168.51.220
. The guest account and password are used. The data will be pulled from
the top level of the guest account in a file named backupfile.
admin > system > restore ip 192.168.51.220 login guest passwd
guestpassword path . file backupfile1
Sendeventlog Command
The sendeventlog command sends the local logfile to a remote FTP server.
The syntax of the sendeventlog command is:
sendeventlog [ip ipaddress] [login login] [password password]
[path pathname] [file filename]
The sendeventlog command options are described in Table 53
Table 53 Sendeventlog Command
C OMMAND O PTION D ESCRIPTION
ip ipaddress
FTP server IP address
login login
FTP Server login name
password password FTP Server password
path pathname FTP server path. For example, /ftphome
file filename Filename on FTP server to save log. For example, sxlogfile