Raritan Computer DOMINION DSX-0N-E - Manual (Page 186)

168 D OMINION SX U SER G UIDE
CLI Input ⋅ powerdelay sequence 2 cycle 5
⋅ cycle nodegroup Group1
Scenario #6 Recycle Group Association (outlets in association are with different
statuses)
Pre-condition Administrator user is logged in via CLI.
Administrator is in power menu.
Group Association named Group1 (shown in Fg.1) is already created.
Outlets in Group1 are with different statuses.
Action 1. Enter Command.
2. Press Enter.
CLI Input ⋅ powerdelay sequence 2 cycle 5
⋅ cycle nodegroup Group1
Scenario #7 Turn ON Group and Port Association simultaneously.
Pre-condition Administrator user is logged in via CLI.
Administrator is in power menu.
Group Association named Group1 (shown in Fg.1) is already created.
Port3 is already associated with outlet8 of PowerStr1 which has been
created and available in the list.
Action 1. Enter Command.
2. Press Enter.
CLI Input ⋅ powerdelay sequence 2 cycle 5
⋅ on port 3 nodegroup Group1
Scenario #8 Turn OFF Group and Port Association simultaneously.
Pre-condition Administrator user is logged in via CLI.
Administrator is in power menu.
Group Association named Group1 (shown in Fg.1) is already created.
Port3 is already associated with outlet8 of PowerStr1 which has been
created and available in the list.
Action 1. Enter Command.
2. Press Enter.
CLI Input ⋅ powerdelay sequence 2 cycle 5
⋅ off port 3 nodegroup Group1
Scenario #10 Recycle Group and Port Association simultaneously.
Pre-condition Administrator user is logged in via CLI.
Administrator is in power menu.
Group Association named Group1 (shown in Fg.1) is already created.
Port3 is already associated with outlet8 of PowerStr1 which has been
created and available in the list.
Action 1. Enter Command.
2. Press Enter.
CLI Input ⋅ powerdelay sequence 2 cycle 5
⋅ cycle port 3 nodegroup Group1.
CLI Power Strip Status
Description: Power Control Menu