Raritan Computer DOMINION DSX-0N-E - Manual (Page 51)

C HAPTER 7: P ORT C ONFIGURATION AND P ORT A CCESS A PPLICATION 33
The Edit Port screen appears.
Figure 27 Edit Port Screen
3. Make sure the port values match the target system’s serial port configuration for the first
three values.
• Select the Baud Rate from the Baud Rate drop-down menu.
Note: The minimum baud rate supported for local port access is 9600.
• Select the Parity Bits from the Parity Bits drop-down menu.
• Select the Flow Control from the Flow Control drop-down menu.
4. In the Detect field, indicate whether you want the Dominion SX to detect or not detect the
physical connection to the target. The default is Not detect. Change by selecting Detect
Physical Connection to the Target from the drop-down menu in the Detect field.
5. Type a command in the Exit Command field. This is the command that will be sent to your
system when a port disconnection occurs, for example, logout.