Raritan Computer DOMINION DSX-0N-E - Manual (Page 33)

C HAPTER 4: N ETWORK S ETTINGS AND S ERVICES 15
Chapter 4: Network Settings and Services
This chapter explains how to configure the basic network settings for the DSX, and how to
configure the various access protocols (SSH, telnet, etc.) It also explains how to configure the
DSX for modem access, and how to enable IP forwarding and create static routes.
Configuring the Basic Network Settings
To configure the basic network settings and discovery ports, click the Setup tab, and then click
Network. The Network Basic Settings and Ports screen appears (Figure 12).
Figure 12 Network Basic Settings and Ports Screen
Give the DSX a Name
To give the DSX unit a name to help identify it:
1. Type a name in the Unit Name field.
2. Click OK.
Configure the DSX’s Network Settings
To configure the network settings:
1. Type an IP address for the DSX in the IP Address field.
2. Type the subnet mask in the Subnet Mask field.
3. Type the IP address of the gateway router in the Gateway IP Address field.
4. Select the speed from the drop-down menu in the Mode field. Your choices are Auto (default)
or 100 Mbps.
5. Type your domain name in the Domain field.
6. Click OK.