Cli association power control – group association – Raritan Computer DOMINION DSX-0N-E User Manual
Page 184
166
D
OMINION
SX
U
SER
G
UIDE
Scenario #2
Association Power Control – Recycle Port Association (Target is
associated to Two Outlets from one Power Strip)
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is physically connected to
Port1 of DSX.
Port Power Association named Target2 is already created and available in
the list.
Outle1 of PowerStr1 is associated to Target2.
Administrator is in Power Control Æ Associations Power Control menu.
Action 1.
Select Port Association named Target2
2.
Click on Power Recycle Interval and enter value:
3.
Press Recycle button.
CLI
Input
Power Recycle Interval value: 1 sec.
Scenario #3
Association Power Control – Recycle Port Association (Target is
associated to Two Outlets from two different Power Strip devices)
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is physically connected to
Port1 of DSX.
Port Power Association named Target2 is already created and available in
the list.
Outle1 of PowerStr1 is associated to Target2.
Administrator is in Power Control Æ Associations Power Control menu.
Action 1.
Select Port Association named Target2
2.
Click on Power Recycle Interval and enter value
3.
Press Recycle button.
CLI Input
Power Recycle Interval value: 1 sec.
Scenario #4
Association Power Control – Recycle Port Association (outlets in the
association are with different statuses)
Pre-condition
Administrator user is logged in via GUI.
Two Power Strip devices (DPX) named PowerStr1 and PowerStr2 are
physically connected to SX Ports.
Port Power Association named Target2 is already created and available in
the list.
Outle1 of PowerStr1 and Outlet2 of PowerStr2 are associated to Target2.
Outlet1 and Outlet2 are with different statuses.
Administrator is in Power Control Æ Associations Power Control menu.
Action 1.
Select Port Association named Target2
2.
Click on Power Recycle Interval and enter value:
3.
Press Recycle button.
CLI Input
Power Recycle Interval value: 1 sec.
CLI Association Power Control – Group Association
Description: Power Control Menu