Ricoh 7500 - Manual (Page 244)

Fax via Computer
234
6
Note
❒ It is recommended that you use a Web Image Monitor running under the
same network environment as this machine. Otherwise, the Web browser
may not open and an error may occur.
Before Use
To use these features, a LAN-Fax Driver must be installed on your computer.
Use the LAN-Fax Driver included on the scanner CD-ROM. You must also make
the required computer to fax network settings on the machine, according to the
type of connection.
Note
❒ When a personal computer and the machine are connected in parallel: See
“Preparing the Machine”, Printer Reference.
❒ When using Ethernet, IEEE 1394 (IPv4 over 1394), or IEEE 802.11b (wireless
LAN): See “Connecting the Machine”, General Settings Guide.
Reference
“Connecting the Machine”, General Settings Guide
“System Settings”, General Settings Guide
“Preparing the Machine”, Printer Reference
Using the Software
This section provides information about LAN-Fax Driver, Address Book, and
LAN-Fax Cover Sheet Editor.
LAN-Fax Driver
This driver allows you to use LAN-Fax functions.
Important
❒ All operations cannot be guaranteed depending on the system environment.
❒ When you use Windows NT, LAN-Fax Driver will not work in an RISC base
processor (MIPS R series, Alpha AXP, PowerPC) environment.
❖ Location of the file
The following folders are on the CD-ROM:
• LAN-Fax Driver for Windows 98/Me
\DRIVERS\LAN-FAX\WIN9X_ME
• LAN-Fax Driver for Windows NT 4.0
\DRIVERS\LAN-FAX\NT4
• LAN-Fax Driver for Windows 2000/XP and Windows Server 2003
\DRIVERS\LAN-FAX\WIN2K_XP