Renesas Pod probe for M16C/1N Group M301N2T-PRB - Manual (Page 14)

M301N2T-PRB User’s Manual 1. Outline
REJ10J0037-0100 Rev.1.00 Mar.16, 2005 Page 12 of 48
1. Outline
This chapter describes the package components, the system configuration, the specifications of the emulator functions and the
operating environment.
1.1 Package Components
The M301N2T-PRB package consists of the following items. When unpacking it, check to see if your M301N2T-PRB contains
all of these items.
Table 1.1 Package components
Item Quantity
M301N2T-PRB pod probe 1
Repair request sheet (English) 1
Repair request sheet (Japanese) 1
M301N2T-PRB User’s Manual (This manual) 1
M301N2T-PRB User’s Manual (Japanese) 1
* Please keep the M301N2T-PRB's packing box and cushion material in your place for reuse at a later time when sending your
product for repair or other purposes. Always use these packing box and cushion material when transporting this product.
* If there is any question or doubt about the packaged product, contact your local distributor.
1.2 Other Tool Products Required for Development
To bring forward programs development on the M16C/1N Group MCUs, the products listed below are necessary in addition to
those contained package above. Get them separately.
Table 1.2 Other tool products required for development
Product Product name Notes
Emulator main unit PC4701(excluding PC4700L and PC4701L) Required
Emulation pod main unit M30100T3-RPD-E Required
Emulator debugger
M3T-PD30 Ver. 8.20 Release1 or the M16C PC4701 Emulator
Debugger included with the M16C R8C Debugger Package
Required
Converter board M30102T-PTC Required
* To purchase these products, contact your local distributor.