Renesas Pod probe for M16C/1N Group M301N2T-PRB - Manual (Page 16)

M301N2T-PRB User’s Manual 1. Outline
REJ10J0037-0100 Rev.1.00 Mar.16, 2005 Page 14 of 48
1.3.2 Names and Functions of the PC4701 Front Panel LEDs
Figure 1.2 shows the names of the LEDs on the front panel of the emulator.
Figure 1.2 Names of the LEDs on the front panel of the PC4701
(1) System Status LEDs
The system status LEDs indicate the emulator PC4701's power supply, firmware operating status, etc. Table 1.3 lists the
definition of each system status LED.
Table 1.3 Definitions of the system status LEDs
Name Status Meaning
ON Emulator system power supply is turned ON.
POWER
OFF Emulator system power supply is turned OFF.
ON Emulator system is operating normally.
Flashing
Special mode (maintenance mode) for downloading firmware. The emulator
system does not operate except for downloading firmware and the self-check.
SAFE
OFF Emulator system is not operating normally.
ON Emulator is not operating normally.
Flashing Downloading firmware. ERROR
ON Emulator is operating normally.
P OWE R
S AFE
E RRO R
STATUS OF
SYSTEM
RES E T
PO WER
CLO CK
RE SE T
RUN
HALT
HIGH
PERFORMANCE
EMULATION
BENCH
Target status LED
PC4701U
STATUS OF
TARGET
System status LED