Starting a broadband internet session – RCA 360 User Manual
Page 21
2 SpeedTouch™ Internet Connectivity
E-DOC-CTC-20031204-0011 v2.0
19
10
At the end of the configuration the following window appears:
Click Finish to complete the configuration.
The Connect MyISP window (see below) appears.
Starting a broadband
Internet session
Proceed as follows:
1
On the Start menu, point Connect To and click the name of the connection you’ve
created e.g. MyISP.
Note
If you are using the classic Start menu click Start > Settings > Network
(and Dial-up) connections > MyISP.
2
The Connect MyISP window appears:
3
If needed, enter user name and password for your user account at the Service
Provider.
4
Click Connect.
5
As soon as the connection is established, the connection message box and dial-up
window are minimized into a DUN icon in the notification area:
You can open your web browser and surf the Internet.