Chapter 9. operations using pads and foot switches, Using pads to play patterns (pad pattern) – Roland TD-10 User Manual
Page 119
By changing the function of controllers or the way in which they are used, you can perform a variety
of convenient operations. This opens up some very interesting performance possibilities.
Using pads to play patterns (Pad Pattern)
You can make settings so that striking a pad will playback a previously selected pattern. This func-
tion provides a very convenient way to use patterns during a live performance.
* If different patterns have been assigned to two or more pads, striking another pad while a pattern is playing
back will cause pattern playback to switch to the newly selected pattern. If you have switched to a pattern
whose instrument settings are different, the sound may be interrupted for an instant.
Procedure
1.
Press [INST]-[F4 (CTRL >)]-[F3 (PATTERN )].
The “INST CTRL” page will appear.
2.
Strike the pad that you wish to edit.
The setting page for the pad you struck will appear.
3.
Use [INC/DEC] or the VALUE dial to select the pattern number.
With a setting of “OFF,” the Pad Pattern function will be off.
* The symbol on the right side of the pattern name indicates how the pattern will be played back. For details
on this setting, refer to p. 98.
4.
The pattern will playback when you hit the pad.
* If you do not want to hear the instrument assigned to that pad, press [CONTROL ROOM]-[F1 (MIXER)]-
[F1 (VOLUME)] and set the volume to “0.”
* Pad patterns cannot be used during sequencer recording.
Using pads to perform button operations (Pad Switch)
fig.10-01
Procedure
1.
Connect pads to TRIGGER INPUT jacks AUX 1 and AUX 2.
2.
Press [SETUP]-[F3 (CTRL)]-[F2 (PAD SW)].
The “PAD SWITCH” page will appear.
3.
Use [INC/DEC] or the VALUE dial to select the combination of functions for the AUX 1 and AUX 2
jacks (refer to the following).
4.
Press [EXIT] to exit this page.
5.
Strike the selected pads, and they will function as switches.
Parameters
Mode (function name)
Function of the pad connected to the AUX1 jack
Function of the pad connected to the AUX2 jack
OFF
Pad switch is off
Pad switch is off
KIT SELECT
Pad switch is off
Select the next kit
PATTERN SEL
Pad switch is off
Select the next pattern
KIT SELECT (2)
Select the previous kit
Select the next kit
PATTERN SEL (2)
Select the previous Pattern
Select the next pattern
Chapter 9. Operations using pads and foot switches
119
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Chapter 10