Roland TD-10 - Manual (Page 97)

The TD-10’s sequencer consists of four parts (like 4 tracks).
The Drum part is used to record/ play back performance
from the pads or an external MIDI controller. There are three
other parts for melodic instruments: Part 1, Part 2 and the
Bass part.
A set of performances for each of these four parameters is
collectively referred to as a pattern.
The Preset patterns (1–50) contain pre-recorded perfor-
mances for each part and can be used for listening, or as a
practice/performance tool. Preset patterns cannot be erased
(p. 104) or recorded over. The User patterns (51–100) can be
used for recording. In order to record melodic instruments
on Part 1, Part 2 and the Bass part, you will need to use an
external MIDI keyboard. Recording the Drum part can be
done from the pads or an external MIDI controller.
Basic sequencer operation
The “SEQENCER” buttons located on the front panel are
used to perform basic operations and access the setting
pages. Pressing [PATTERN] will call up the basic display
page of the sequencer.
fig.07-01
[PATTERN]: Select patterns. This is the basic display page
for the sequencer.
[PART]: Make settings for each Part.
[TEMPO]: Set the Tempo.
[CLICK]: Turn the click sound on/off.
[STOP]: Pressing this will stop playback. Pressing it
once again returns you to the beginning of the
song.
[PLAY]: Start sequencer playback.
[REC]: Access the recording setting page, and enter
record-standby mode.
fig.07-01ae
[CURSOR]: Press the left button to rewind, and the right
button to fast-forw0.000eee le33 Tw (bu can be)Tj T* -0.0(mcorrns you to the beginning(Select rewind, of the)Tj T*downhe left butmcorrns you endw (song.)Tj -52.55Tc 0.44443T* 0.0150c 0.08Ftinde0)lslocated basic opginngs foe left,ctivelrns youacks).)Tj 0 -1.4111 TD -0.0001 Tcexuennic operthatettllow.eratio1 BT /F741 Tf 14 31150c 744.34 749.36 Tm /Cs8 cs 0 0-0.0( eratioS BT /F7 0 T* 0-1.4444 TD -0.0002 Tc 0.00Uk. Pr tool. Pelect peration)Tj /F3 1 Tf 9 1150c 782.51 534.53 TD -0.00013Tc 0.07Irum prns pock.ble butmcdify access the consiacontol. Preset corfacks).