Royal Consumer Information Products ALPHA9155SC - Manual (Page 69)

63
(Continued) FLAG OPTIONS
FLAG
NUMBER DESCRIPTION
55 0 = Do not require the amount received from a customer and the calculation of the
change.
1 = Require the amount received from a customer to be registered.
2 = Prohibit tendering.
56 0 = Enable registering transactions which more than one media is received, for
example, cash and a check (split tendering).
1 = Disable registering transactions which more than one media is received, for
example, cash and a check (split tendering).
57 0 = Enable pressing the [#/ST/NS] key immediately after entering numeric key.
1 = Disable pressing the [#/ST/NS] key immediately after entering numeric key.
58 0 = Enable pressing just the [#/ST/NS] key to open the cash drawer.
1 = Disable pressing just the [# /ST/NS] key to open the cash drawer.
59 0 = Enable the [VOID] [-/CPN] [RETURN][-%] keys used as minus departments in the
“REG” mode.
1 =
Disable the [VOID] [-/CPN] [RETURN][-%] keys used as minus departments in the “REG”
mode.
60 0 = Enable using [RA] [PO] key in the “REG” (Register) position.
1 = Disable using [RA] [PO] key in the “REG” (Register) position.
61 0 = Cash declaration is not compulsory before a “Z1” reading.
1 = Cash declaration is compulsory before a “Z1” reading.
62 0 = Disable issuing a second complete receipt after issuing the first one.
1 = Enable issuing a second complete receipt by pressing the [SUBTOTAL W/TAX] key.
63 0 = Enable issuing a stub receipt (printed total only).
1 = Disable issuing a stub receipt.
64 0 = Open the drawer when you press the [AMOUNT TEND/TOTAL] key.
1 = Do not open the drawer when you press the [AMOUNT TEND/TOTAL] key.
65 0 = Open the drawer when you press the [CHECK/STUBS] key.
1 = Do not open the drawer when you press the [CHECK/STUBS] key.
66 0 = Open the drawer when you press the [CHARGE] key.
1 = Do not open the drawer when you press the [CHARGE] key.
67 0 = Open the drawer when you press the [CHARGE 2] key.
1 = Do not open the drawer when you press the [CHARGE 2] key.
68 0 = Open the drawer when you press the [CHARGE 3] key.
1 = Do not open the drawer when you press the [CHARGE 3] key.
69 0 = Make a key stroke sound.
1 = Do not make a key stroke sound.
70 0 = Enable reports for training.
1 = Disable reports for training.