Radio Shack 28 - Manual (Page 24)

24
SPECIAL FUNCTIONS
The following information describes some of
your Model 28’s special on-screen, display, and
search functions.
THINGS YOU SEE
On-Screen Displays
To view your Model 28’s current operating mode
and other information about your Model 28, re-
peatedly press
SELECT during playback or while
watching TV. Each time you press SELECT , you
see this information on the TV screen in the fol-
lowing order.
• Function indicator / tape speed / tape
counter
• Function indicator / tape speed / time /
channel
• No display
Note: The function indicator and tape speed dis-
plays only stay on the TV screen for a few sec-
onds, but the tape counter or time and channel
indicators remain on until you select another
function.
Function Indicators
When you press a function button (such as
STOP ), the selected function’s indicator appears
on the TV screen.
When you change the channel, the new channel
number appears on the TV screen for about 5
seconds.
Note: If you play back a poor quality (worn) or
damaged tape, the function indicator might not
appear on the TV screen.
USING THE SLEEP TIMER
The Model 28’s sleep timer lets you set the Mod-
el 28 so it plays for a specific amount of time
then automatically turns off.
Follow these steps to set the sleep timer.
1. Press SLEEP on the remote control.
SLEEP 0 MINUTE appears on the TV
screen.
2. Within 5 seconds, repeatedly press SLEEP
until the TV screen shows the desired sleep
time period. You can set the time in 30-
minute increments, up to 120 minutes.
Note: If you do not press SLEEP within 5
seconds, SLEEP and the displayed time
period disappear. Press SLEEP once to
redisplay the time.
To cancel the sleep timer, repeatedly press
SLEEP until SLEEP 0 MINUTE appears on the
TV screen.
SP COUNT 0:12:34
STOP
SP
STOP 5:40 PM
05
STOP
16-420.fm Page 24 Tuesday, July 20, 1999 11:32 AM