Radio Shack 28 - Manual (Page 33)

33
Notes:
• If you press ADD/DELETE after selecting
the program number (the program num-
ber flashes), the Model 28 clears the
timer program screen and deletes any
settings you entered.
• After you make a tape speed selection,
pressing SELECT causes the timer pro-
gram screen to disappear and stores any
settings you entered.
6. Press POWER to turn off the Model 28. The
TIMER REC indicator turns on.
Clearing an Automatic Timer
1. Press POWER to turn on the Model 28.
2. Press MENU. The main menu appears on
the TV screen.
3. Press 1 on the remote control to select
TIMER PROGRAMMING . The timer pro-
gram screen appears on the TV screen.
Note: If the timer recording is already in
progress, press
MONITOR on the remote
control then press STOP/EJECT on the
Model 28.
4. Use the number buttons (1-7) on the
remote control to select the desired pro-
gram number.
5. Press ADD/DELETE on the remote control
to clear the program timer.
6. To clear another program timer, select the
timer number then press ADD/DELETE
again to clear it.
7. Press MENU to exit the screen.
TODAY TIMER RECORDING
(TIMER NUMBER 8)
The Model 28’s today timer (stored in program
timer number 8) lets you quickly program the
Model 28 to start and stop recording within the
next 24 hours.
Note: You cannot set a today timer while you
are recording a program.
Setting the Today Timer
You must use the buttons on the front of the
Model 28 to set the today timer. You cannot use
the remote control.
Note: Before you start, be sure you set the Mod-
el 28’s clock to the correct date and time (see
“Setting the Clock” on Page 19). If you have not
yet set the clock, the Model 28 automatically en-
ters the clock setting mode before it displays the
today timer program screen.
1. Insert a blank cassette, or one you want to
record over, into the cassette compartment.
The Model 28 automatically turns on.
2. Press MONITOR . The today timer program
screen appears on the TV screen.
This screen displays the same information
as you see on the automatic timer program
screen (except the program number). The
current date appears on the
DATE line and
the current time appears on the START
TIME line. The current start time hour
flashes.
PROGRAM NUMBER 1
DATE 02/15 THU
START TIME 10:28 AM
END TIME 11:28 AM
CHANNEL 07
TAPE SPEED SP
DATE 02/15 THU
START TIME 10:28 AM
END TIME - - : - - - -
CHANNEL 07
TAPE SPEED SP
- TODAY TIMER -
16-420.fm Page 33 Tuesday, July 20, 1999 11:32 AM